Welcome to Xdrivers
Please login or register.

Author Topic: Fitting BC Coilovers to 3.0D  (Read 533 times)

0 Members and 1 Guest are viewing this topic.

March 13, 2018, 07:45:42 PM

Bristol X5 E53

  • Newbie
  • *
  • Posts: 3
  • Country: gb
    • View Profile
Fitting BC Coilovers to 3.0D
« on: March 13, 2018, 07:45:42 PM »
Hi guys new here.

I've got a 2006 E53 3.0D Le Mans Edition and some BC Coilovers, just looking for some information with regards to fitting these. Ideally looking for someone that has already done this modification.

I have tried searching on here already  ;)

March 15, 2018, 07:46:01 PM
Reply #1

Horizon

  • Member
  • *****
  • Posts: 2434
  • Country: gb
  • Location: Bury Lancashire
  • Gender: Male
    • View Profile
Re: Fitting BC Coilovers to 3.0D
« Reply #1 on: March 15, 2018, 07:46:01 PM »
Hi and welcome to the forum 😀
Regards coilovers, Raj is the only member that I can recall fitting coilovers, he doesn't frequent the forum much these days as he's moved over to the E90 335i forums.
He fitted some to his E53 4.8 Is a few years ago due to the inherent 4.8 all round air suspension Achilles heal.
What is your objective in swapping to coilovers ? I guess on the X5 3.0 you have rear only air suspension, although I believe all round air was a cost option on all models. Are you looking for a ride height option?
As rear spring conversions are a £200 option.

2011 Kia Sorento KX3  2.2D 60 Plate Auto in black ( mine )
BMW E83 X3.  3.0d M Sport, 2008 in black ( now gone )
Honda CRV 2.2 d EX SUV 2011 in Silver. ( Wife's )
BMW E93 330i Convertible  Msport  2007.  ( Now sold )
VW Golf 2.0 TDI 140 GT 2010 ( now sold )
Now Sold 55 plate, X5, 3.0 D Sport. Silv

March 16, 2018, 04:57:33 PM
Reply #2

Bristol X5 E53

  • Newbie
  • *
  • Posts: 3
  • Country: gb
    • View Profile
Re: Fitting BC Coilovers to 3.0D
« Reply #2 on: March 16, 2018, 04:57:33 PM »
Yes it is 100% about the ride height. Trying to get the height the same as the car in this post http://www.bimmerfest.com/forums/showthread.php?t=693339

I just don't like the huge wheel to arch gap :(


March 16, 2018, 09:01:44 PM
Reply #3

henrym3

  • Member
  • ****
  • Posts: 845
  • Country: gb
  • Location: Wareham Dorset
  • Gender: Male
    • View Profile
Re: Fitting BC Coilovers to 3.0D
« Reply #3 on: March 16, 2018, 09:01:44 PM »

Don’t need to go to an America site to see a  lowered X


Sent from my iPhone using Tapatalk
E53 X5 4.6is, Carbon Black, LPG, Paddle Shift, Dynavin N6, Lowered, 22"Wheels, Side Bars.
E30 M3 Black, S50B32 Engine, 6 Speed Box, Ireland Engineering ARBs & Big Brake Conversion, Lowered, 18"LMs, CF CAI, CF Splitter & Barge Board, ZM3 Quad Exhaust.
VW R32 Gone

March 16, 2018, 10:39:00 PM
Reply #4

Horizon

  • Member
  • *****
  • Posts: 2434
  • Country: gb
  • Location: Bury Lancashire
  • Gender: Male
    • View Profile
Re: Fitting BC Coilovers to 3.0D
« Reply #4 on: March 16, 2018, 10:39:00 PM »

Don’t need to go to an America site to see a  lowered X


Sent from my iPhone using Tapatalk
Obviously no speed bumps in Dorset then 😀
And your parked 2 inches from a wheel refurb there 😬
Must admit I'm not a fan of lowewered cars normally, but that's sits well 👍
2011 Kia Sorento KX3  2.2D 60 Plate Auto in black ( mine )
BMW E83 X3.  3.0d M Sport, 2008 in black ( now gone )
Honda CRV 2.2 d EX SUV 2011 in Silver. ( Wife's )
BMW E93 330i Convertible  Msport  2007.  ( Now sold )
VW Golf 2.0 TDI 140 GT 2010 ( now sold )
Now Sold 55 plate, X5, 3.0 D Sport. Silv

March 22, 2018, 12:37:51 PM
Reply #5

mikemsm999

  • Newbie
  • *
  • Posts: 10
  • Country: gb
  • Location: Cardiff
  • Gender: Male
    • View Profile
Re: Fitting BC Coilovers to 3.0D
« Reply #5 on: March 22, 2018, 12:37:51 PM »
Hi guys new here.

I've got a 2006 E53 3.0D Le Mans Edition and some BC Coilovers, just looking for some information with regards to fitting these. Ideally looking for someone that has already done this modification.

I have tried searching on here already  ;)

Its quite a straight forward job, the biggest issue was some of the bolts on the existing struts and arms were rusted solid even after soaking them for a day they would not come off. Ended up having to heating them up to get them off without the worry of snapping them.

You will need to strip some of the rear boot panels to get to the fittings for the rears but apart from that approach it like changing a normal suspension set up (make sure you disconnect the battery before starting!).

I didn't cut all the plastic/ rubber pipe work, just folded and cable tied it and hid it behind any splash guards and panels I could find so if I ever sell the car and the next owner is a complete fruit loop and want to go back to air suspension they can.

The BC kit is what I bought, great kit, and quality. The set up it comes set at is lower than standard but not too low, and the ride is firmer without braking your teeth. If you want to get the set up right for your taste, DON'T put all the boot trims back in as you wont be able to get to the settings - a mistake I made! Get it set up the way you like it then put all the panels back in. Once you are happy make sure you get it aligned/ tracked.

Should have fitted it years ago rather than throwing constant money at the evil that is 'X5 Air Suspension'!

 
2004 E53 X5 4.8is Imola Red

March 22, 2018, 10:01:56 PM
Reply #6

Bristol X5 E53

  • Newbie
  • *
  • Posts: 3
  • Country: gb
    • View Profile
Re: Fitting BC Coilovers to 3.0D
« Reply #6 on: March 22, 2018, 10:01:56 PM »
Thanks guys.

mikemsm999 did you have to do anything to the ECU after disconnecting the air suspension?

March 23, 2018, 01:09:36 AM
Reply #7

mikemsm999

  • Newbie
  • *
  • Posts: 10
  • Country: gb
  • Location: Cardiff
  • Gender: Male
    • View Profile
Re: Fitting BC Coilovers to 3.0D
« Reply #7 on: March 23, 2018, 01:09:36 AM »
Yes, a friend used his programmer to remove the air suspension error message from the binnacle.
2004 E53 X5 4.8is Imola Red