thanks Greydog

I tried that but it dodnt work

Cant understand why i can no longer see it in INPA

HI I have the orange 4x4 light on the dash. Its been on for many many months. I know it is because the SAS needs recalibration. Ive done this many time in the past using INPA but the error tends to come back after a while so I just leave it. I am about to px the car at a garage as its now done 192k ...

****** Can I please resurrect this post because I am still no nearer**** I cannot set stopwatch, display temperature, fuel economy, etc etc etc in the bottom 20 digit display of the high binnacle. I really miss not knowing how many miles I have left fuel wise and the date and time. This 20 digit dis...

MID wires behimd glovebox ??

Is there some kind of MID module there????

All the above have been tried time and time again.

Still not been successful in finding out where this information ( temp, consumption, time, stopwatch etc etc) comes from??????

Done the battery disconnect.

Cannot restart the software as BMW scanner does not recognise the MID module...."module not found "

i have the same problem, Car is going to "sleep" New Battery Alternator ok..14.6 volts at the battery when engine running. Sleep current drain less than !00mA....maybe 70mA If I leave tail boot open for half an hour...car wont start because battery is gone...even though it has a new one. I...

No....It all happened when the battery completely flattened.

AS I say, the display works because it tells me to fasten my seatbelt.

There's just no display regarding temp, cock / date, stopwatch consumption, fuel left etc etc

I have no MID info on the binnacle in my X5 E53. where does it get it's information from to display? It has a "HIGH" binnacle. Everything on it is good but no MID info....ie consumption data, clock, stopwatch, fuel left, temperture etc. etc. The 20 digit disply between the >..................

I reckon its the TV module. Radio is displaying all stations and listing the stations OK. One thing I noticed when working in the boot on was that inside the TV module, there is a cooling fan and this constantly starts and stops about one minute intervals. Not sure what this has to do with the MID i...

Relating to my other post which is fizzling out (K-Bus Down) I have got most functions of the car back now after all my modules stopped communicating and controlling the car when the battery absolutely flattened Using BMW Scanner, TV and MID modules are some of those modules not found. My LCD is dis...

I agree but plugged into the battery there is a 4mm plastic drain pipe which leads to outside the car. The pipe had come out of the battery side and so any moisture generated by the battery (whatever that might be) seems to have come out of the hole in the battery side and just run down the battery ...

Yes I also thought perhaps I had wiggled a wire and remade a connection. But because the TV signal has gone,....I wondered if it was owt to do with the video module. Looking on NewTIS, the vid module is located very close to the battery. When I first removed the battery to take it off the car, there...

...and what are the numbers what are listed immediately after each module title

e.g DDE 7.8000.131 hw: 10 sw: 172

??

Would you believe it !!! So today, I thought I would rip up the carpets and get the number off the LCM to chase up a replacement. That done and photographed, I thought I'd just have a final look around with BMW scanner. Switch on ignition, start scanning,. . . almost towards the end of the first pag...