Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Brake fluid change.....what do you pay?

General car related chat
Post Reply
Online
sapphireblack
Snr Member
Snr Member
Posts: 1644
Joined: Mon Apr 18, 2011 8:30 am
Location: Kent, garden of England

Brake fluid change.....what do you pay?

Post by sapphireblack » Fri Feb 22, 2019 9:49 am

Curious if this is a unilateral price (vehicle age related) or if its made up on the day?

Sport160
Newbie
Newbie
Posts: 25
Joined: Tue Oct 16, 2018 3:17 pm

Re: Brake fluid change.....what do you pay?

Post by Sport160 » Fri Feb 22, 2019 5:12 pm

Do you mean at a main dealer or just in general? I pay £45 from a local garage.

User avatar
X5Sport
Global Moderator
Global Moderator
Posts: 18553
Joined: Fri Sep 03, 2010 4:09 pm
Location: Planet X6......

Re: Brake fluid change.....what do you pay?

Post by X5Sport » Fri Feb 22, 2019 5:14 pm

My local BMW Dealer was £160 including a 90-min safety check.

I do it myself using a pressure bleeder system. £45 isn’t bad a all.
:ant: Never anthropomorphise computers. They hate that.

Online
sapphireblack
Snr Member
Snr Member
Posts: 1644
Joined: Mon Apr 18, 2011 8:30 am
Location: Kent, garden of England

Re: Brake fluid change.....what do you pay?

Post by sapphireblack » Fri Feb 22, 2019 5:32 pm

I should have said what i paid earlier in the week :oops:

£70.01 at main dealer whilst in for its 'alternator' recall.

weirdfish
Member
Member
Posts: 637
Joined: Fri Apr 01, 2011 7:10 pm
Location: Glos.

Re: Brake fluid change.....what do you pay?

Post by weirdfish » Fri Feb 22, 2019 5:49 pm

I take it this is something you cant do yourself as you need to operate the abs system to bleed all the old fluid from the valves.

User avatar
X5Sport
Global Moderator
Global Moderator
Posts: 18553
Joined: Fri Sep 03, 2010 4:09 pm
Location: Planet X6......

Re: Brake fluid change.....what do you pay?

Post by X5Sport » Fri Feb 22, 2019 6:07 pm

I have done it with a pressure reservoir connected to the master reservoir. The pressure is set to 20psi (you can go to 2-Bar [28psi]) and then I start at the furthest point away and do each wheel in turn until the fluid runs clear. I shut the bleed valve and then give the caliper a series of gentle taps and re-open the bleed valve fo a few more seconds.

If the system needs more invasive work and pipes get opened then you might need the ABS cycling kit. That being said, when I changed a front caliper I used a special pipe clamp in two places to close the line and then put the system under 10psi pressure as this ensured that the system was under positive pressure preventing air getting back in.

If the master cylinder needs changing then I believe that it is essential to use the ABS bleeder system due to the increased likelihood of air getting into the modulator.

So far both our E46 and E71 have been fine doing it this way.

This is the pressure reservoir (I don’t fill it with fluid but just monitor the brake fluid level in the master reservoir as it saves a lot of cleaning).

https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1
:ant: Never anthropomorphise computers. They hate that.

Post Reply