Complexity depends on your end game
1. If it’s for simple phone charging, there may/should be a 12v socket in the armrest, a flush mounted charger can be installed and look neat
- A8DFF71A-FE95-4E22-BC98-2A317A35D2E8.jpeg (131.17 KiB) Viewed 1201 times
2. If it’s for USB media, it’s a bit more complicated due to coding requirement that may/may not work.
I’d be removing the forward panel primarily and checking for existing wires,
A If present you can simply change the panel for the unit with USB/Aux outlet & terminate though you have to check function and possibly code
B If no wires are present, it’s possible to attain a USB extension lead, run it from the glovebox socket, through the dash, along the side of the console (under carpet) then your choice of termination, either run the lead through a hole or buy and install a facia mount
Of the options I’d favour 2b, so as to avoid coding, however prior to install or pulling things apart, you can check your required function directly from the glove box usb outlet
It’s relatively easy to pull car apart, having just installed Avin screen a lot of the tear down is required per request, allbeit that’s A N other option to acquire additional USB outlets