Hello all,
had the above for almost 5 years and just hit 138,000 mls. Oils, filters etc changed every 7000-8000 mls. The manual gear change is becoming a little sticky, particularly reverse. Obviously will get the gearbox oil checked but it was also suggested I changed the transfer case oil, I'm sure this has never been changed, would anyone recommend doing this?
Could anyone recommend a supplier? I always buy all oils, filters etc from Opie but they can't help.
2006 X3 3.0d manual
- Alan Gunn
- Member
- Location: Anglesey North Wales
Post
Re: 2006 X3 3.0d manual
Both boxes would benefit from new oil.
The transfer box will need a reset afterwards but a good indi will be able to do it all.
The transfer box will need a reset afterwards but a good indi will be able to do it all.
- rockwell
- Newbie
Post
Re: 2006 X3 3.0d manual
Thanks Alan, I may as well order diff oil as well. Could I reset using a C110 scanner? Otherwise there's a good diagnostic guy close by.
- Alan Gunn
- Member
- Location: Anglesey North Wales
Post
Re: 2006 X3 3.0d manual
No the c110 can't do the reset.
The foxwell 510 can do it and the iCarsoft BMM V2.0 as well.
The foxwell 510 can do it and the iCarsoft BMM V2.0 as well.