Greetings to the long lost world of X5.
The steering rack ends have had the fritz on the E53 and need replacing and when reading up on the subject I see that a "special tool" is needed to get at the nut or whatever it is called to get the rack ends out. Being of Scots decent I don't want to splash out on something that is a once only job so can anyone tell me the size of the appropriate spanner then I can probably modify an existing tool that has had little use.
Rick
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Steering Rack ends
Steering Rack ends
I didn’t use a special tool when I did mine. Just some big ass spanners and / or adjustable wrench. Easy.
Steering Rack ends
Thanks I saw that a special tool was required and the drawing of it looked as if it was a thin end to get into a tight spot but if normal tools like a hammer and axe are all that is needed then i should be fine.